- Creates water resistance on walls and floor prior to tiling.
- Broken tiles can be replaced without causing damage to walls, floor or tray.
- No need for fixing components or washers associated with other products.
- Solvent welded joints for added strength and security.
- No need to build support boxing for the trap element.
- No need to reduce the height in floor joists.
- LOW PROFILE FLOOR4MA
900mm Tray is 10mm above floorboards.
1200mm Tray is 15mm above floorboards.
1500mm Tray is 20mm above floorboards.
1200 x 800mm Tray is 15mm above floorboards.
1400 x 900mm Tray is 20mm above floorboards.
1500 x 900mm Tray is 20mm above floorboards.
1700 x 800mm Tray is 20mm above floorboards.
We also stock height reducer for those 15 or 20mm above floor which reduces 20mm edge to 15mm and
15mm edge to 10mm. - Installation time of the FLOOR4MA is approximately 1 Hour.
- No need to cut floorboards flush with adjoining walls, when installing FLOOR4MA.
- WALL4MA boards are tongue & grooved for easy installation.
- Fixing of accessories, towel rails, radiators etc can be screwed directly into WALL4MA boards as there are no rawl plugs required.
- No need to use waterproof tape on tongue & grooved joints, only on butt joints.
- Suitable for all types of tiles, even small mosaic.
- Maximum area of floor board to be removed is 810mm x 810mm for all sizes of FLOOR4MA Trays.
- Eliminates time consuming joinery work associated with other wet room trays.
- Pipe boxings, bath surrounds, vanity tops, steps, seats etc can all be constructed from our product quickly and easily.
- For construction, the material can be sawn, drilled, planed, routed, sanded, glued, nailed and screwed.
- The boards offer excellent sound and insulating applications.
- Suitable for underfloor heating.
- Our products Fire resistant rating is B1.